The FD 1800 R-DT micropile drilling machine is a 23 ton hydraulic motor drilling machine, with DEUTZ TCD 2013 L6 2V (maximum power 190 kW) and T2-1800 rotary heads (maximum speed 0-110 rpm, maximum torque 1800 kgm and 2 hydraulic motors) and T2-1000 (maximum speed 0-88 rpm, maximum torque 1000 kgm and 2 hydraulic motors).
The closing vice and the third vice have a closing force of 15300 daN, while the unscrewing vice has a closing force of 5500 daN and an unscrewing force of 15300 daN, all 3 with a maximum diameter of 350 mm.
Micropiles Drilling Machine FD 1800 R-DT
UNDERCARRIAGE
| Overall Length | 3740 mm |
| Track Width | 2350 mm |
| Shoes Width | 500 mm |
ENGINE
| DEUTZ Engine | |
| Type | TCD 2013 L6 2V |
| Maximum Power Output | 190 kW |
| Rated Output | 2300 r.p.m. |
| Fuel Tank Capacity | 250 l |
HYDRAULIC SYSTEM
| Hydraulic Pumps | 1 Circuit | 80 l/min |
| 2 Circuit | 55 l/min | |
| 3 Circuit | 55 l/min | |
| Hydraulic Oil Tank Capacity | 484 l | |
| Working Pressure | 250 bar |
MAST
| Mast Length | 8000 mm |
| Pull-Down Cylinder Force (Push/Pull) | 20000/20000 kgm |
| Pull-Down Stroke | 7200 mm |
| Maximum Rods Length | 5200 mm |
ROTARY HEAD
| T2-1800 | Maximum Torque | 1800 kgm |
| Speed Range | 0 - 110 rpm | |
| Number of Hydraulic Motors | 2 | |
| T2-1000 | Maximum Torque | 1000 kgm |
| Speed Range | 0 - 88 rpm | |
| Number of Hydraulic Motors | 2 |
WINCH
| AUXILIARY WINCH | |
| Maximum pulling force (1st Layer) | 25 kN |
| Rope Diameter | 32 mm |
CLAMPS
| CLOSING CLAPM | |
| Blocking Clamp Diameter | 350 mm |
| Blocking Clamp Force | 15300 daN |
| BREAKOUT CLAPM | |
| Blocking Clamp Diameter | 350 mm |
| Blocking Clamp Force | 5500 daN |
| Break-Out Force | 15300 daN |
| THIRD CLAMP | |
| Blocking Clamp Diameter | 350 mm |
| Blocking Clamp Force | 15300 daN |
AUXILIARY SERVICE CRANE
| Fassi F.80 |
WATER PUMP (UDOR 200)
| Maximum Water Delivery | 200 l/min |
| Maximum Water Pressure | 80 bar |
WEIGHT
| Total Weight- approx | 23 ton |
