The FD 1800 HD-DT micropile drilling machine is a hydraulic drilling rig on truck, with hydraulic power pack installed on board, CUMMINS QSB 5.9 engine (maximum power 178 kW) and Rotary drill heads T3-2000 (maximum speed 113 rpm and maximum torque 2045 daNm).
The clamping vice and the unscrewing vice have a closing force of 1600 kg and a maximum diameter of 350 mm.
Micropiles Drilling Machine FD 1800 HD-DT
UNDERCARRIAGE
| Overall Length | 3210 mm |
| Track Width | 2350 mm |
| Shoes Width | 500 mm |
ENGINE
| DEUTZ Engine | |
| Type | TCD 2013 L6 2V |
| Maximum Power Output | 190 kW |
| Rated Output | 2300 r.p.m. |
| Fuel Tank Capacity | 350 l |
HYDRAULIC SYSTEM
| Hydraulic Pumps | 1st Circuit | 80 l/min |
| 2nd Circuit | 55 l/min | |
| 3rd Circuit | 55 l/min | |
| Hydraulic Oil Tank Capacity | 481 l | |
| Working Pressure | 250 bar |
MAST
| Mast Length | 8000 mm |
| Pull-Down Cylinder Force (Push/Pull) | 13000/20000 kgm |
| Pull-Down Stroke | 4300 mm |
| Maximum Rods Length | 4000 mm |
ROTARY HEAD
| T3-2000 | Maximum Torque | 2045 kgm |
| Speed Range | 0 - 113 rpm | |
| Number of Hydraulic Motor | 3 | |
| Type of Hydraulic Motors | CHAR-LYNN | |
| T2-1000 | Maximum Torque | 1000 kgm |
| Speed Range | 0 - 88 rpm | |
| Number of Hydraulic Motor | 2 | |
| Type of Hydraulic Motors | DANFOSS |
WINCH
| AUXILIARY WINCH | |
| Maximum pulling force (1st Layer) | 15 kN |
| Rope Diameter | 10 mm |
CLAMPS
| CLOSING CLAMP | |
| Blocking Clamp Diameter | 350 mm |
| Blocking Clamp Force | 15300 daN |
| BREAKOUT CLAMP | |
| Blocking Clamp Diameter | 350 mm |
| Blocking Clamp Force | 5500 daN |
| Break-Out Force | 15300 daN |
| THIRD CLAMP | |
| Blocking Clamp Diameter | 350 mm |
| Blocking Clamp Force | 15300 daN |
AUXILIARY SERVICE CRANE
| Fassi F.80 |
WATER PUMP (UDOR 200)
| Maximum Water Delivery | 200 l/min |
| Maximum Water Pressure | 80 bar |
WEIGHT
| Total Weight- approx | 20 ton |
