The FD 2000 HD micropile drilling machine is a tracked and compact hydraulic drilling machine, with DEUTZ TCD 2013 L6 2V engine (maximum power 190 kW) and T2-2500 rotation head with 0-100 rpm speed, maximum torque 2500 kgm and 2 motors plumbers. The closing vice and the third vice have a closing force of 15300 daN, while the unscrewing vice has a closing force of 5500 daN and an unscrewing force of 15300 daN, all 3 with a maximum diameter of 350 mm.
The ideal solution for foundations, micropiles, tie rods and anchors.
Micropiles Drilling Machines FD 2000 HD
UNDERCARRIAGE
| Overall Length | 450 mm |
| Track Width | 2400 mm |
| Shoes Width | 600 mm |
ENGINE
| DEUTZ Engine | |
| Type | TCD 2013 L6 2V |
| Maximum Power Output | 190 kW |
| Rated Output | 2300 r.p.m. |
| Fuel Tank Capacity | 250 l |
HYDRAULIC SYSTEM
| Hydraulic Pumps | 1° Circuito | 80 l/min |
| 2° Circuito | 55 l/min | |
| 3° Circuito | 55 l/min | |
| Hydraulic Oil Tank Capacity | 570 l | |
| Working Pressure | 250 bar |
MAST
| Mast Length | 10000 mm |
| Rotary Head Stroke | 23000/30000 kgm |
| Pull-Down Force (Push/Pull) | 8500 mm |
ROTARY HEAD
| T2-2500 | Maximum Torque | 2500 kgm |
| Speed Range | 0 - 100 rpm | |
| Number of Hydraulic Motor | 2 |
WINCH
| AUXILIARY WINCH | |
| Maximum pulling force (1st Layer) | 25 kN |
| Rope Diameter | 32 mm |
CLAMPS
| CLOSING CLAMP | |
| Blocking Clamp Diameter | 350 mm |
| Blocking Clamp Force | 15300 daN |
| BREAKOUT CLAMP | |
| Blocking Clamp Diameter | 350 mm |
| Blocking Clamp Force | 5500 daN |
| Break-Out Force | 15300 daN |
| THIRD CLAMP | |
| Blocking Clamp Diameter | 350 mm |
| Blocking Clamp Force | 15300 daN |
WATER PUMP (UDOR 200)
| Maximum Water Delivery | 200 l/min |
| Maximum Water Pressure | 80 bar |
WEIGHT
| Total Weight- approx | 33 ton |
